Slimline for tight side returns. Round for bigger yards. Underdeck if you're short on space everywhere. We size it on site, supply it from quality Australian-made stock, install it properly, and plumb the overflow to stormwater the way ACT rules require.
Tell us what you need. We'll come out, look at your setup, and send you the full price in writing within 48 hours.
Not every yard is the same. We supply and install three main configurations so there's a practical fit for your site, whether you've got a tight side passage, a wide back yard, or a deck above a narrow space.
Designed for narrow side returns and tight fence lines. Sizes from 1,000 litres up to 5,000 litres, in over 20 colours to match your Colorbond or weatherboard. The most common choice for Canberra suburban blocks where every centimetre counts.
The workhorse of residential rainwater storage. Sizes from 500 litres right up to 5,000 litres for standard suburban installs. A round tank gives you the most storage for the footprint and they're typically the most economical option where space allows.
No useable side return, but you've got a deck? Underdeck tanks are engineered to fit the low-clearance space beneath an existing deck without removing it. They make clever use of space most homeowners write off entirely. A conversation worth having if you're stuck for tank placement.
We come to your home, look at your roof catchment, side returns, and yard layout to work out what size and type of tank actually makes sense.
You receive the full price in writing within 48 hours. Supply, install, slab prep, plumbing, overflow tie-in. No surprises.
We handle slab prep, tank delivery, all plumbing connections, first-flush diverter, pump hookup where needed, and overflow to stormwater.
We test everything with you present, walk you through how the system works, and leave the site clean. You're collecting water from the next rainfall.
It depends on your roof catchment area, how you plan to use the water, and the space you have available. A larger roof collects more in Canberra's rain events, but the right tank size also depends on your demand. We work this out properly on the site visit so you're not undersized in summer or oversizing unnecessarily. Call us on 0448 464 599 and we can talk through the basics before we come out.
Most residential above-ground tanks below a certain volume don't require development approval, but the answer varies by tank size, placement, and site. We're familiar with ACT install requirements and will flag anything you need to be across before we start. It's part of the site visit conversation. Call us on 0448 464 599 to talk through your situation.
Yes, with the right first-flush diverter, inlet screening, and in some cases a UV or filtration system, rainwater tanks can supply laundry, toilets, and outdoor taps. Some homeowners also supply the whole house. The setup for drinking water is more involved. We'll talk you through the options suited to how you want to use it. Call us on 0448 464 599 and we'll point you in the right direction.
Often yes. We assess the existing slab on the site visit. If it's in good condition and the right size for the new tank, we can use it. If it needs work, we'll tell you that upfront and include it in the written quote. Call us on 0448 464 599 to tell us what you've got and we'll give you an honest answer.
We come to your place, size the right tank for your block and catchment, and send you the full price in writing. No obligation to proceed.
